Ps Food Container Production Line Suppliers – Food container production line – MACHINERY
Ps Food Container Production Line Suppliers – Food container production line – MACHINERY Detail:
Main parameters
|
Item |
Unit |
Parameter |
Remark |
| Model |
FS-FPP75-90 |
||
| Applicable materials |
GPPS granule |
||
| Thickness of product |
mm |
1-4 |
|
| Width of sheet |
mm |
540–1100 |
|
| Foaming rate |
12-20 |
||
| Bulk weight of product |
Kg/m³ |
50-83 |
|
| Thermal conductivity of product |
W/m.k |
0.021-0.038 |
|
| Output |
kg/h |
70-90 |
|
| Rated power |
Kw |
140 |
|
| Power supply |
three phase 380v/50Hz |
||
| External dimension |
mm |
24000×6000×2800 |
|
| Complete machine weight |
Ton |
About10 |
Ⅰ 75/90 PS foam sheet extrusion line includes the following components
1. Automatic feeding system
1. Feeding style
Spiral feeding
2. Main parameters
| Hopper capacity of the mixer (kg) |
300 |
|
| Motor Power of the mixer（kw） |
3 |
|
| Feeding capacity of the feeder (kg/h) |
200 |
|
| Motor power of the feeder (kw) |
1.5 |
2 The first stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motors with frequency converters
⑶ Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
⑷ Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
⑸ Technical parameters
| Driving motor power（kw） |
37 |
 |
| Diameter of screw bolt （mm） |
Φ70 |
|
| L/D ratio of screw bolt |
32：1 |
|
| Max rev of screw （rpm） |
60 |
|
| Number of heating zones |
7 |
|
| Heating power （kw） |
28 |
4 Non-stop machine hydraulic automatic replace filter system
Non-stop hydraulic quickly net changing device
Main parameters
| Oil pump motor power （kw） |
4 |
  |
| Oil pump max pressure （Mpa） |
20 |
|
| Filter net quantity（piece） |
4 |
|
| Heating power （kw） |
5 The second stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motor with frequency converters
⑶ Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
⑷ Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
⑸ Cooling and temperature-reduction style
Circulating water cooling，automatic bypass system.
⑹ Technical parameters
| Driving motor power （kw） |
45 |
 |
| Diameter of screw bolt （mm） |
Φ90 |
|
| L/D ratio of screw bolt |
34：1 |
|
| Max rev of screw （rpm） |
30 |
|
| Number of heating zones |
8 |
|
| Heating power（kw） |
40 |
6 Extruder head and mold
1. Structure
Round of the extruder head，mold mouth can adjust，head with a pressure gauge and pressure output alarm device. The head heater with water cooling .
2. Material
：Ra0.025μm:
High quality tool steel，heat-treated，flow channel surface roughness： Ra0.025μm
⑶ Main technical data
| Diameter of mold orifice | according to the order contract |  |
| Quantity of temperature control zones |
2 |
|
| Accuracy of temperature control（℃） |
±1 |
|
| Heating power（kw） |
5 |
7 Shaping cooling and cutting system
1. Shaping style：shaping barrel
2. Cooling style：shaping barrel cools with water and external wind-ring
⑶Structure：shaping barrel, cutting knife and rack components
⑷Main technical parameters
| Shaping barrel size（mm） | According to the order contract |  |
| Blower power （kw） | Three phrase 0.55 |
8 Pulling system
1. Pulling style：four-roller parallel pull
2. Driving motor form：AC-motor, frequency conversion velocity modulation, speed reducer changes speed
⑶ Main parameters
| Pulling roller quantity（piece） |
4 |
 |
| Pulling roller size （mm） |
Φ260×1300 |
|
| Motor power（kw） |
1.5 |
9 Electrostatic elimination system
| Adopt to tod type ion rod electrostatic elimination system, working volt is 7KV above, can produce high effective and powerful ion wind, effectively eliminate electrostatic danger. |  |
10 Winding system
1. Form
Double-arm air shaft type
2. Main technical parameters
| Coiling weight（kg） | Maximum40 |  |
| Coiling diameter（mm） | Max 1100 | |
| Length control | Meter counter control, adjust length | |
| Driving motor | Torque motor 8n.m×4sets |
11 Electric control system
| extruder heating control cabinet |
One set |
  |
| The second stage extruder heating control cabinet | One set | |
| winding control cabinet | One set |
Ⅲ Production flow chart
Ⅳ Details of foam sheet extrusion line
A. Automatic feeding system
1. Feeding style
Spiral feeding
2. Main parameters
| Hopper capacity of the mixer (kg) |
300 |
| Motor Power of the mixer（kw） |
3 |
| Feeding capacity of the feeder (kg/h) |
200 |
| Motor power of the feeder (kw) |
1.5 |
B. The first stage extruder
1.Screw and barrel materials
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motors with frequency converters
3. Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
4. Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
5. Technical parameters
| Driving motor power（kw） |
37 |
| Diameter of screw bolt（mm） |
Φ70 |
| L/D ratio of screw bolt |
32：1 |
| Max rev of screw（rpm） |
50 |
| Number of heating zones |
7 |
| Heating power （kw） |
28 |
C. Blowing agent injecting system
1. Sort of pump
Plunger type high precision and high pressure measuring pump, to match one-way valve to control, the injection volume is controlled by plunger lift
2. Main technical parameters
| Sort of blowing agent |
butane or LPG |
| Metering pump flow |
40（L／H） |
| Injection high pressure |
30（Mpa） |
| Pressure gauge |
0-40（Mpa） |
| Motor power |
3（kw） |
D. Non-stop machine hydraulic automatic replace filter system
Hydraulic quickly net changing device
Main parameters
| Oil pump motor power |
4（kw） |
| Oil pump max pressure |
20（Mpa） |
| Filter net quantity |
4（piece） |
| Heating power |
8（kw） |
E. The second stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motor with frequency converters
3. Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
4. Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature ，Cooling water device in heater .
5. Cooling and temperature-reduction style
Circulating water cooling ，automatic bypass system.
6. Technical parameters
| Driving motor power（kw） |
45 |
| Diameter of screw bolt（mm） |
Φ120 |
| L/D ratio of screw bolt |
34：1 |
| Max rev of screw（rpm） |
50 |
| Number of heating zones |
8 |
| Heating power（kw） |
40 |
F．Extruder head and mold
1. Structure
Round of the extruder head，mold mouth can adjust，head with a pressure gauge and pressure output alarm device. The head heater with water cooling .
2. Material Ra0.025μm:
High quality tool steel，heat-treated，flow channel surface roughness： Ra0.025μm
3. Main technical data
| Diameter of mold orifice |
According to the order contract |
| Quantity of temperature control zones |
1 |
| Accuracy of temperature control |
±1（℃） |
| Heating power |
5（kw） |
G. Shaping cooling and cutting system
1. Shaping style：shaping barrel
2. Cooling style：shaping barrel cools with water and external wind-ring
3.Structure：shaping barrel, cutting knife and rack components
4. Main technical parameters
| Shaping barrel size（mm） |
According to the order contract |
| Blower power（kw） |
Three phrase0.55 |
H. Pulling system
1.Pulling style：four-roller parallel pull, compress with air drive
2.Driving motor form：AC-motor, frequency conversion velocity modulation, speed reducer changes speed
3. Main parameters
| Pulling roller quantity（piece） |
4 |
| Pulling roller size （mm） |
Φ260×1300 |
| Motor power （kw） |
1.5 |
I. Electrostatic elimination system
Adopt to tod type ion rod electrostatic elimination system, working volt is 7KV above, can produce high effective and powerful ion wind, effectively eliminate electrostatic danger.
J. Winding system
1.Form
Double-arm air shaft type
2. Main technical parameters
| Coiling weight（kg） | Maximum40 |
| Coiling diameter （mm） | Max 1100 |
| Length control | Meter counter control, adjust length |
| Driving motor | Torque motor 8n.m×2 sets |
K. Electric control system
Heating control cabinet of the first stage extruder：one set
Heating control cabinet of the second stage extruder：one set
Winding control cabinet：one set
Product detail pictures:
Related Product Guide:
We have been ready to share our knowledge of internet marketing worldwide and recommend you suitable merchandise at most aggressive rates. So Profi Tools present you very best price of money and we are ready to develop alongside one another with Ps Food Container Production Line Suppliers – Food container production line – MACHINERY , The product will supply to all over the world, such as: Lebanon, Afghanistan, Birmingham, We have many years' experience in hair product production, and our strict QC Team and skilled workers will ensure that we give you top hair products with the best hair quality and workmanship. You will get successful business if you choose to cooperate with such a professional manufacturer. Welcome your order cooperation!
By Alma from Las Vegas - 2018.06.30 17:29
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By Rae from Leicester - 2017.01.11 17:15
Related products
-
China High Quality Non-Woven Machine Factories ...
Model: ZX-LT500 Non-woven Laminated Box Bag Making Leader Machine This machine adopts mechanical, optical, electrical and pneumatic integration technology, suitable for feeding the roll material of non-woven fabric and laminated non-woven fabric. It’s a specialized equipment for making the primary shaping non-woven(laminated) three dimensional bag(no need to turn the bag inside out). This equipment features stable production, strong and decent sealing of bags, good looking, top grade, fancy a...
-
China High Quality Box Bag Making Machine Manuf...
1. The machine is easy to operate and can produce paper handles with high speed usually reach 170 pairs per minute. 2. We design and offer the optional auto-production line, which can automatic gluing replace the human gluing procedure so that help to reduce lots of labor cost. It is strongly advice the paper bag producing factory use the auto-produce line that also support customize. 3. The unit paper bag can lift the heavy things of 15 kg at most, when the tension of raw materials reaches a...
-
High Productivity Automatic Flexo Custom Label ...
CONTROL PART 1.Double work station. 2.3 inch air shaft. 3.Magnetic powder brake auto tension control. 4.Auto web guide. UNWINDING PART 1.Double work station. 2.3 inch air shaft. 3.Magnetic powder brake auto tension control. 4.Auto web guide PRINTING PART 1. Pneumatic lifting and lowing printing plate cylinders auto lifting plate cylinder when the machine is stopped. After that can run ink automatically. When the machine is opening,it will make alarm to start the auto lowering plate printing c...
-
China High Quality Nonwoven Fabric Bag Making M...
-with online D-cut punching -with shoes bag/bottom gusset and side gusset -with online T-shirt bag auto punching Adjustable photoelectric sensor for printing color mark tracking( it can be turned on/off on the touch screen) Online D-cut punching drawstring bag punching bag side sealing by ultrasonic welding Durable cold cutter Sealing mould with heating device inside(temperature control by thermal indicator) static eliminator device Double stepping motor feeding system for bag length fix Man ...
-
Melt Blown Making Machine Factories – 1...
2 Process flow Additive (recycle edge) ↓ Material→melting and extruding→filtering→metering→spinning→quenching→air-flow drawing Material→melting and extruding→filtering→metering→spinning→hot air drawing→cooling→ web forming→calendering Material→melting and extruding→filtering→metering→spinning→quenching→air-flow drawing →winding and slitting A. Main Equipment for Spunbond Section 1. Material hopper, 2sets 2. Suction, dosing and mixing device, 2sets 3. Extruder, 2sets 4. Spinning mach...
-
Label Printing Machine Supplier – 4 Col...
Main Configration plate thickness：1.7mm Paste Version Tape Thickness：0.38mm Substrate Thickness：40-350gsm paper Machine Color：Grey White Operating Language：Chinese and English Lubrication System：Automatic Lubrication System–Adjustable lubricationtime and quantity.when there is insufficient lubrication or system failure,the indicator lamp will automatically alarm. Operating Console：Infront of the printing group Air Pressure required：100PSI(0.6Mpa)，Clean，Dry，Oil-free compressed...
