Biodegradable Food Container Making Machine Supplier – Food container production line – MACHINERY
Biodegradable Food Container Making Machine Supplier – Food container production line – MACHINERY Detail:
Main parameters
|
Item |
Unit |
Parameter |
Remark |
| Model |
FS-FPP75-90 |
||
| Applicable materials |
GPPS granule |
||
| Thickness of product |
mm |
1-4 |
|
| Width of sheet |
mm |
540–1100 |
|
| Foaming rate |
12-20 |
||
| Bulk weight of product |
Kg/m³ |
50-83 |
|
| Thermal conductivity of product |
W/m.k |
0.021-0.038 |
|
| Output |
kg/h |
70-90 |
|
| Rated power |
Kw |
140 |
|
| Power supply |
three phase 380v/50Hz |
||
| External dimension |
mm |
24000×6000×2800 |
|
| Complete machine weight |
Ton |
About10 |
Ⅰ 75/90 PS foam sheet extrusion line includes the following components
1. Automatic feeding system
1. Feeding style
Spiral feeding
2. Main parameters
| Hopper capacity of the mixer (kg) |
300 |
|
| Motor Power of the mixer（kw） |
3 |
|
| Feeding capacity of the feeder (kg/h) |
200 |
|
| Motor power of the feeder (kw) |
1.5 |
2 The first stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motors with frequency converters
⑶ Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
⑷ Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
⑸ Technical parameters
| Driving motor power（kw） |
37 |
 |
| Diameter of screw bolt （mm） |
Φ70 |
|
| L/D ratio of screw bolt |
32：1 |
|
| Max rev of screw （rpm） |
60 |
|
| Number of heating zones |
7 |
|
| Heating power （kw） |
28 |
4 Non-stop machine hydraulic automatic replace filter system
Non-stop hydraulic quickly net changing device
Main parameters
| Oil pump motor power （kw） |
4 |
  |
| Oil pump max pressure （Mpa） |
20 |
|
| Filter net quantity（piece） |
4 |
|
| Heating power （kw） |
5 The second stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motor with frequency converters
⑶ Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
⑷ Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
⑸ Cooling and temperature-reduction style
Circulating water cooling，automatic bypass system.
⑹ Technical parameters
| Driving motor power （kw） |
45 |
 |
| Diameter of screw bolt （mm） |
Φ90 |
|
| L/D ratio of screw bolt |
34：1 |
|
| Max rev of screw （rpm） |
30 |
|
| Number of heating zones |
8 |
|
| Heating power（kw） |
40 |
6 Extruder head and mold
1. Structure
Round of the extruder head，mold mouth can adjust，head with a pressure gauge and pressure output alarm device. The head heater with water cooling .
2. Material
：Ra0.025μm:
High quality tool steel，heat-treated，flow channel surface roughness： Ra0.025μm
⑶ Main technical data
| Diameter of mold orifice | according to the order contract |  |
| Quantity of temperature control zones |
2 |
|
| Accuracy of temperature control（℃） |
±1 |
|
| Heating power（kw） |
5 |
7 Shaping cooling and cutting system
1. Shaping style：shaping barrel
2. Cooling style：shaping barrel cools with water and external wind-ring
⑶Structure：shaping barrel, cutting knife and rack components
⑷Main technical parameters
| Shaping barrel size（mm） | According to the order contract |  |
| Blower power （kw） | Three phrase 0.55 |
8 Pulling system
1. Pulling style：four-roller parallel pull
2. Driving motor form：AC-motor, frequency conversion velocity modulation, speed reducer changes speed
⑶ Main parameters
| Pulling roller quantity（piece） |
4 |
 |
| Pulling roller size （mm） |
Φ260×1300 |
|
| Motor power（kw） |
1.5 |
9 Electrostatic elimination system
| Adopt to tod type ion rod electrostatic elimination system, working volt is 7KV above, can produce high effective and powerful ion wind, effectively eliminate electrostatic danger. |  |
10 Winding system
1. Form
Double-arm air shaft type
2. Main technical parameters
| Coiling weight（kg） | Maximum40 |  |
| Coiling diameter（mm） | Max 1100 | |
| Length control | Meter counter control, adjust length | |
| Driving motor | Torque motor 8n.m×4sets |
11 Electric control system
| extruder heating control cabinet |
One set |
  |
| The second stage extruder heating control cabinet | One set | |
| winding control cabinet | One set |
Ⅲ Production flow chart
Ⅳ Details of foam sheet extrusion line
A. Automatic feeding system
1. Feeding style
Spiral feeding
2. Main parameters
| Hopper capacity of the mixer (kg) |
300 |
| Motor Power of the mixer（kw） |
3 |
| Feeding capacity of the feeder (kg/h) |
200 |
| Motor power of the feeder (kw) |
1.5 |
B. The first stage extruder
1.Screw and barrel materials
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motors with frequency converters
3. Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
4. Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
5. Technical parameters
| Driving motor power（kw） |
37 |
| Diameter of screw bolt（mm） |
Φ70 |
| L/D ratio of screw bolt |
32：1 |
| Max rev of screw（rpm） |
50 |
| Number of heating zones |
7 |
| Heating power （kw） |
28 |
C. Blowing agent injecting system
1. Sort of pump
Plunger type high precision and high pressure measuring pump, to match one-way valve to control, the injection volume is controlled by plunger lift
2. Main technical parameters
| Sort of blowing agent |
butane or LPG |
| Metering pump flow |
40（L／H） |
| Injection high pressure |
30（Mpa） |
| Pressure gauge |
0-40（Mpa） |
| Motor power |
3（kw） |
D. Non-stop machine hydraulic automatic replace filter system
Hydraulic quickly net changing device
Main parameters
| Oil pump motor power |
4（kw） |
| Oil pump max pressure |
20（Mpa） |
| Filter net quantity |
4（piece） |
| Heating power |
8（kw） |
E. The second stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motor with frequency converters
3. Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
4. Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature ，Cooling water device in heater .
5. Cooling and temperature-reduction style
Circulating water cooling ，automatic bypass system.
6. Technical parameters
| Driving motor power（kw） |
45 |
| Diameter of screw bolt（mm） |
Φ120 |
| L/D ratio of screw bolt |
34：1 |
| Max rev of screw（rpm） |
50 |
| Number of heating zones |
8 |
| Heating power（kw） |
40 |
F．Extruder head and mold
1. Structure
Round of the extruder head，mold mouth can adjust，head with a pressure gauge and pressure output alarm device. The head heater with water cooling .
2. Material Ra0.025μm:
High quality tool steel，heat-treated，flow channel surface roughness： Ra0.025μm
3. Main technical data
| Diameter of mold orifice |
According to the order contract |
| Quantity of temperature control zones |
1 |
| Accuracy of temperature control |
±1（℃） |
| Heating power |
5（kw） |
G. Shaping cooling and cutting system
1. Shaping style：shaping barrel
2. Cooling style：shaping barrel cools with water and external wind-ring
3.Structure：shaping barrel, cutting knife and rack components
4. Main technical parameters
| Shaping barrel size（mm） |
According to the order contract |
| Blower power（kw） |
Three phrase0.55 |
H. Pulling system
1.Pulling style：four-roller parallel pull, compress with air drive
2.Driving motor form：AC-motor, frequency conversion velocity modulation, speed reducer changes speed
3. Main parameters
| Pulling roller quantity（piece） |
4 |
| Pulling roller size （mm） |
Φ260×1300 |
| Motor power （kw） |
1.5 |
I. Electrostatic elimination system
Adopt to tod type ion rod electrostatic elimination system, working volt is 7KV above, can produce high effective and powerful ion wind, effectively eliminate electrostatic danger.
J. Winding system
1.Form
Double-arm air shaft type
2. Main technical parameters
| Coiling weight（kg） | Maximum40 |
| Coiling diameter （mm） | Max 1100 |
| Length control | Meter counter control, adjust length |
| Driving motor | Torque motor 8n.m×2 sets |
K. Electric control system
Heating control cabinet of the first stage extruder：one set
Heating control cabinet of the second stage extruder：one set
Winding control cabinet：one set
Product detail pictures:
Related Product Guide:
To be a result of ours specialty and service consciousness, our enterprise has won an excellent status between buyers all around the globe for Biodegradable Food Container Making Machine Supplier – Food container production line – MACHINERY , The product will supply to all over the world, such as: Estonia, Greenland, San Francisco, In the increasingly competitive market, With sincere service high quality products and well-deserved reputation, we always offer customers support on products and techniques to achieve long-term cooperation. Living by quality, development by credit is our eternal pursuit, We firmly believe that after your visit we will become long-term partners.
By Diana from Birmingham - 2017.09.16 13:44
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
By Edwina from Zambia - 2018.12.28 15:18
Related products
-
Small Melt Blown Machine Suppliers – 16...
2 Process flow Additive (recycle edge) ↓ Material→melting and extruding→filtering→metering→spinning→quenching→air-flow drawing Material→melting and extruding→filtering→metering→spinning→hot air drawing→cooling→ web forming→calendering Material→melting and extruding→filtering→metering→spinning→quenching→air-flow drawing →winding and slitting A. Main Equipment for Spunbond Section 1. Material hopper, 2sets 2. Suction, dosing and mixing device, 2sets 3. Extruder, 2sets 4. Spinning mach...
-
China High Quality Paper Plate Making Machines,...
Model ML400J Diameter of Paper Dish Large tray (mould replacement) Capacity 12-25Pcs/min (one working station) Power Source 380V 50HZ Total Power 7KW weight 1400Kg Dimension (L*W*H)2300*800*2000mm Raw Material According to the customers’ demands(original paper, white paperboard, white cardboard, aluminum foil paper or others) Air Source Working Pressure4.8Mpa Working Air Volume 0.5m3/min ML400J type super & intelligent paper plate machine is designed for large sized ...
-
Cup Printing Machine Manufacturer – 6 c...
CONTROL PART 1.Double work station. 2.3 inch air shaft. 3.Magnetic powder brake auto tension control. 4.Auto web guide. UNWINDING PART 1.Double work station. 2.3 inch air shaft. 3.Magnetic powder brake auto tension control. 4.Auto web guide PRINTING PART 1. Pneumatic lifting and lowing printing plate cylinders auto lifting plate cylinder when the machine is stopped. After that can run ink automatically. When the machine is opening,it will make alarm to start the auto lowering plate printing c...
-
China High Quality Label Printing Machine Facto...
UNWINDING PART。 1. Single feeding work station 2. Hydraulic clamp,hydraulic lift the material，hydraulic control the unwinding material width，it can adjust left and right movement. 3. Magnetic powder brake auto tension control 4. Auto web guide 5.Pneumatic brake—40kgs PRINTING PART 1. Pneumatic lifting and lowing printing plate cylinders auto lifting plate cylinder when the machine is stopped. After that can run ink automatically. When the machine is opening,it will make alarm to...
-
China High Quality Full Servo Sanitary Napkin M...
Ⅲ.main point 1. Adapt PLC control the whole machine, operate the machine by touch screen 2. the conveyor belt can absorb the product, when it is run high speed, it will not fly 3. Cutter adapt pressure spring protect the knife from overload pressure 4. edge sealing ADL and cutter adapt the air cylinder protect the device 5. Main machine adapt frequency control the speed 6. main machine adapt bearing, timing belt, right angle gearbox, eruptional box drive 7. Cutter, ADL, edge sealing, easy qui...
-
China High Quality Lady Sanitary Napkin Machine...
Ⅲ.main point 1. Adapt PLC control the whole machine, operate the machine by touch screen 2. the conveyor belt can absorb the product, when it is run high speed, it will not fly 3. Cutter adapt pressure spring protect the knife from overload pressure 4. edge sealing ADL and cutter adapt the air cylinder protect the device 5. Main machine adapt frequency control the speed 6. main machine adapt bearing, timing belt, right angle gearbox, eruptional box drive 7. Cutter, ADL, edge sealing, easy qui...
